Anderson Electronics, LLC TEL: (814) 695-4428   FAX: (814) 696-0403   Email: sales@aextal.com
Anderson Electronics Flash navigation menu appears here. This site uses the free Macromedia Flash player.
Crystal Products
Anderson Electronics Inc has over four decades of experience in designing and manufacturing quartz crystal resonators. During that time Anderson Electronics has shipped more than 50 million sealed crystal units and crystal blanks to our customers. Anderson Electronics crystals can be found performing flawlessly in telecommunications equipment, computers and peripherals, test equipment, aircraft, missiles, speed controls, telemetry receivers and transmitters, medial and communications equipment.

Crystal Products Crystal Blanks

Anderson Electronics manufactures quartz crystal blanks from 1.000 MHz to 250 MHz including flat, contoured, beveled and ring supported resonators. Experienced crystal engineers develop blank designs that are optimized to meet customers' specifications while assuring manufacturability and maintaining the lowest cost and highest quality. The entire manufacturing operation from cutting the bar through lapping or chemical milling and testing is carefully controlled by Anderson technicians. Crystal blanks are available in a wide range of frequencies, modes, geometries, finishes, electrode configurations and metalization.

Crystal Products Crystal Blanks Inverted Mesa

Anderson Electronics manufactures quartz crystal blanks from 1.000 MHz to 250 MHz including flat, contoured, beveled and ring supported resonators. Experienced crystal engineers develop blank designs that are optimized to meet customers' specifications while assuring manufacturability and maintaining the lowest cost and highest quality. The entire manufacturing operation from cutting the bar through lapping or chemical milling and testing is carefully controlled by Anderson technicians. Crystal blanks are available in a wide range of frequencies, modes, geometries, finishes, electrode configurations and metalization.

Crystal Products Crystal Blanks Standard Type

Anderson Electronics manufactures quartz crystal blanks from 1.000 MHz to 250 MHz including flat, contoured, beveled and ring supported resonators. Experienced crystal engineers develop blank designs that are optimized to meet customers' specifications while assuring manufacturability and maintaining the lowest cost and highest quality. The entire manufacturing operation from cutting the bar through lapping or chemical milling and testing is carefully controlled by Anderson technicians. Crystal blanks are available in a wide range of frequencies, modes, geometries, finishes, electrode configurations and metalization.

Crystal Products Doubly-Rotated AT

Anderson Electronics, LLC manufactures hi-precision/hi-reliability doubly rotated-quartz crystal units for application in precision oven controlled crystal oscillators (OCXO). Doubly-rotated crystals include SC, IT and FC cuts offering the performance benefits of very low aging (0.5x10-9/day), low vibrational and g-sensitivity and high stability. Doubly-rotated crystals are manufactured in a variety of coldweld packages typically used for the stringent requirements of ovenized oscillator applications. Packages include HC-35, HC-37, HC-40, HC-43, and HC-45.

Crystal ProductsMPX

Anderson Electronics microprocessor crystals are available in standard resistance welded thru-hole HC-49/U, and HC-49/SM, HC-49/KSM surface mount devices. Standard tolerances are +/- 30 PPM @ 25 C and +/- 30 PPM -20/+70 C. Microprocessor crystals are available in bulk and in tape and reel. Standard clock driver frequencies and custom frequencies are available.

Crystal ProductsMPX Surface Mount MPX

Anderson electronics provides HC-49/U and HC-49/S (5 mm max. ht.) surface mount devices in standard clock driver frequencies and in custom frequencies per customer requirements. The AE49KSM is offered as a footprint compatible replacement for the Epson SG-615 plastic package. A variety of tolerances and temperature stabilities are available. In addition to the common metal holder type SMT crystals, Anderson also supplies 5 x 7 and 5 x 3.2 millimeter surface mount devices models AE131, AE170 and AE232. Tape and Reel packaging is standard for surface mount crystals in quantities =/> 500 pcs.

Crystal ProductsMPX Thru Hole MPX

Anderson Electronics provides HC-49/U and HC-49/S (5 mm max. ht.) leaded devices in standard clock driver frequencies and in custom frequencies per customer requirements. A variety of tolerances and temperature stabilities are also available. Leaded devices are typically packaged in bulk, however Tape and Reel packaging is available upon request.

Crystal Products Precision AT Cut

Anderson Electronics, LLC manufactures inverted-mesa ring supported quartz crystal resonators. Inverted mesas, also called high frequency fundamental mode crystals, are manufactured by a process where the removal of material required to achieve the design frequency is accomplished by chemical milling. Chemical milling permits design frequencies exceeding those achieved through more tradition mechanical abrasion techniques. Fundamental modes are available from 30 MHz to 250 MHz third and fifth overtones are available from approximately 90 MHz to 250 MHz. Ring supported resonators are available as blanks and as sealed units in a variety of precision holders. Ring supported resonators offer unique performance advantages for specific applications. Applications include high frequency clock, wide deviation VCXOS and wide bandpass discrete crystal filters.

Crystal Products Precision AT Cut Surface Mount AT Cut

Anderson Electronics manufactures precision inverted mesa quartz crystal units to customer specifications in three configurations: model AE100, 0.320" square ceramic package and formed lead (gull-wing) HC-43/HC-49 and HC-45 offering aging rates =/< 3 PPM per year at 40 degrees C. Fundamental modes are available from 30 MHz to 250 MHz third and fifth overtones are available from approximately 90 MHz to 250 MHz. Tape and Reel packaging is available at customer request.

Crystal Products Precision AT CutThru Hole AT Cut

Anderson Electronics manufactures precision inverted mesa quartz crystal units to customer specifications in two configurations: HC-43 and HC-45 coldweld leaded holders enabling aging performance of =/< 3 PPM per year at 40 degrees C. Fundamental modes are available from 30 MHz to 250 MHz third and fiftth overtones are available from approximately 90 MHz to 250 MHz. Tape and Reel packaging is available at customer request.

Crystal Products Precision Inverted Mesa Surface Mount

Anderson Electronics manufactures precision inverted mesa quartz crystal units to customer specifications in three configurations: model AE100, 0.320" square ceramic package and formed lead (gull-wing) HC-43/HC-49 and HC-45 offering aging rates =/< 3 PPM per year at 40 degrees C. Fundamental modes are available from 30 MHz to 250 MHz third and fifth overtones are available from approximately 90 MHz to 250 MHz. Tape and Reel packaging is available at customer request.

Crystal Products Precision Inverted MesaThru Hole

Anderson Electronics manufactures precision inverted mesa quartz crystal units to customer specifications in two configurations: HC-43 and HC-45 coldweld leaded holders enabling aging performance of =/< 3 PPM per year at 40 degrees C. Fundamental modes are available from 30 MHz to 250 MHz third and fifth overtones are available from approximately 90 MHz to 250 MHz. Tape and Reel packaging is available at customer request.

Crystal Products Precision Inverted MesaThru HoleHFF Oscillator Applications

Crystal Products Precision Inverted MesaThru HoleHFF Filter Applications


[Home] [Product Search] [Find a Representative] [Technical Information] [Contact Us] [About Us]

Copyright 2010 Anderson Electronics, LLC