Anderson Electronics, LLC TEL: (814) 695-4428   FAX: (814) 696-0403   Email: sales@aextal.com
Anderson Electronics Flash navigation menu appears here. This site uses the free Macromedia Flash player.
Crystal Products

5th Overtone AT cut polished blanks 50.000MHz to 170.000MHz 
   
   
ELECTRICAL SPECIFICATIONS  
DESCRIPTION Polished quartz crystal blank 5th overtone for hybrid oscillator applications
CUT AT
FREQUENCY RANGE 50.000 MHz to 170.000 MHz
HOLDER AE 100
MODE 5
LOAD CAPACITANCE series to 56 pF
CALIBRATION TOLERANCE +/- 50 PPM minimum
STABILITY VS TEMPERATURE +/-5 PPM to +/-100 PPM
BEST STABILITY VS TEMPERATURE RANGE +/- 5 PPM @ 0 to +50C
  +/- 5 PPM @ -10 to +60C
  +/- 10 PPM @ -10 to +70C
  +/- 15PPM @ -40 to +85C
  +/- 35 PPM @ -55 to +125C
 
UPPER TURNOVER TEMPERATURE C to C
LOWER TURNOVER TEMPERATURE C to C
DRIVE LEVEL 250 uW typical
SHUNT CAPACITANCE 6.0 pF maximum
MOTIONAL CAPACITANCE .45 fF typical
CM TOLERANCE +/- 20 % typical
RESISTANCE 100 Ω maximum
Q
AGING +/- 5 PPM / Yr typical
SPUR-FREE AREA
SPURIOUS SUPPRESSION
BLANK DIAMETER .200 to .350 inches in diameter-contact plant
ELECTRODE DIAMETER as required
ELECTRODE METALIZATION Gold, Aluminum, Silver, or Nickel over Silver
PACKAGE FOR SHIPMENT Bulk
OPTIONS packaging in waffle packs or tubes available, contact plant for specific details on requirements
PDF Datasheet

 

(Go to top of page)


[Home] [Product Search] [Find a Representative] [Technical Information] [Contact Us] [About Us]

Copyright 2010 Anderson Electronics, LLC